Add Redundant Interface

This section describes how to add redundant interfaces.

➢

To add a redundant interface:

1.

From the Ethernet Redundancy menu, choose option 1, and then press Enter.

Add Redundant Interface

2.

Choose the Master Interface for which to create a new redundant interface (for example, 'OVOC Client-Server Network'), and then press Enter.

Ethernet Redundancy Mode

3.

Enter the number corresponding to the interface in the selected network that you wish to make redundant (for example, 'eno', 'eno1', 'eno2'), and then press Enter.

4.

Enter the number corresponding to the desired Ethernet Redundancy Mode (for example 'active-backup'), and then press Enter.

Confirm Ethernet Redundancy Update

5.

Type y to confirm the changes; the OVOC server automatically reboots for changes to take effect.